Yetac Web Shop Mobile Logo

HARD-USE NO B.S. GEAR

HARD-USE NO B.S. GEAR

  • English
  • Slovenščina
  • Shipping to:

Shop

  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod Black
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod Black
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod Black
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod Black
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod Black
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod
  • BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod

Brand: Bravo Company MFG

BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod

Product code: BCM-VG-KM-MOD-3-BLK

Availability : In stock

  • Direct Attach to KeyMod™ Version Rails
  • Low-profile length for increased mobility
  • Manufactured from high-quality polymers
  • Made in the U.S.A.
  • Weight: only 56 grams

Price:

Description

BCMGUNFIGHTER Vertical Grip Mod-3 KeyMod

 

Direct Attach to KeyMod™ Version Rails

  • Low-profile length for increased mobility and decreased “snag” factor
  • The forward angle increases the rigidity of the forearm while providing a more natural wrist angle
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations
  • Anchor and bolt system offers a simple robust design while maintaining a lightweight 56 grams
  • Made in the U.S.A. and manufactured from high-quality, impact resistant polymers

 

Installation:

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. The grip can be installed in your desired orientation, angled forward or back
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further
  • Push the BCM Vertical Grip against the rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn)
  • Ensure there is no wiggle or forward/backward movement once tight
  • Blue thread locker may be used on threaded fasteners

Tools needed: T15 Torx Driver (not supplied)

 

Additional information

Shipping weight0.110 kg
Shipping size234 x 131 x 46 mm
Color

There are no products